Post Falls Electrical Company handles electrical work for homeowners, landlords, property managers, and businesses across Post Falls and the surrounding area. Whether you are dealing with a dead outlet, planning a panel upgrade, or need wiring run for a new appliance or EV charger, the service range covers it. Repairs, troubleshooting, generator hookups, lighting, rewiring, safety inspections - it is all on the table.
When you call, you reach someone who knows the trade and can scope the job on the phone. Decisions about the work get made while you are on the phone. No waiting on a callback to find out what something involves or what it costs. We treat your home and its wiring the way we would our own, and that shapes every job from the first call to the final walkthrough.
Safe wiring. Solid workmanship. Straight answers.
Call (986) 946-5326 for a quote on any electrical job in Post Falls.
Seeing flickering lights or a warm outlet? Those are the kinds of symptoms that need a proper look, not a guess. Flickering lights, dead outlets, a burning smell, a breaker that keeps tripping, or half a house with no power - each one points somewhere specific, and finding that location is the first job.
A diagnostic visit means tracing the fault before anything is replaced. We check the circuit, the connections, the breaker, and the wiring path to find what is actually causing the problem. GFCI and AFCI protection get checked in context - a nuisance trip on a ground-fault outlet is a different problem from an arc-fault breaker that will not reset, and the two are handled differently.
The fault traced before anything is replaced - that is the standard on every service call, whether the issue is a sparking outlet or a tripped breaker that will not hold.
Reach out and we'll get it diagnosed.
If you're not sure your panel can handle the load, that question is worth answering before adding circuits. Older homes in Post Falls often have panels that were sized for a much lighter electrical demand. Adding a heat tape circuit, an EV charger, or a backup generator hookup can push an older 100-amp service past what it was designed to carry.
A panel upgrade typically means replacing the breaker box and bringing the service entrance up to current capacity - most often a 200-amp service upgrade. We run a load calculation first to confirm what the panel actually needs to support, and we address grounding and bonding as part of the work. Where a full replacement is not needed, a subpanel installation can add capacity in a specific area of the home or building without touching the main service.
A plain answer on repair versus upgrade is part of what you get on the call. The price is confirmed before anything is scheduled, and you are told what it covers.
Pick up the phone and we'll get rolling.
From a dead outlet to a full room of new switches, this is some of the most common electrical work we handle. GFCI outlet installation is standard in kitchens, bathrooms, garages, and outdoors. AFCI outlets and breakers cover bedrooms and living areas where arc faults are a real risk. USB outlets, dimmer switches, weatherproof outdoor outlets - each one involves running the right wiring and making sure the circuit can carry the load.
Dedicated circuits for major appliances are part of this work too. A dryer outlet, a range outlet, or a 240-volt outlet for a large appliance each needs its own circuit sized to the load. We also handle hardwired smoke detectors and carbon monoxide detectors - wired units that stay on even when a battery dies.
For light commercial spaces, outlet and switch work follows the same process: scope the job on the call, confirm the price, schedule the work.
Call and we'll handle the lights, outlets, and panel.
When the job is done, we leave your home clean and powered, and that goes for lighting work as much as any other service. Recessed lighting installation, LED fixture upgrades, under-cabinet lighting, ceiling fan installation and wiring - these jobs improve how a space looks and functions, and they start with making sure the circuit and the box can support what is going in.
Outdoor lighting covers a range of situations. Security lighting and motion sensor lights need weatherproof wiring and the right fixture placement. Landscape lighting requires a circuit run to the right location. Each of these is a wiring job first, and the fixture choice follows from what the circuit and location can support.
Commercial lighting installation for offices, retail spaces, and commercial buildings follows the same approach. We scope the work, confirm what the panel can handle, and get it scheduled.
One call and we are on it.
Kootenai County winters are not mild. Sub-freezing temperatures, ice storms, and multi-day outages are a regular part of life in Post Falls, and the electrical work that comes with that climate is specific. The three services below come up every winter here, and each one has a clear electrical side that we handle.
A generator is only useful if it is wired correctly. The electrical side of a backup generator hookup includes the transfer switch, the dedicated circuit from the panel, and a capacity check to confirm the panel can carry the added load. A transfer switch is what keeps the generator from back-feeding the utility line - it is not optional, and it has to be sized to the circuits it will protect.
Post Falls sees multi-day outages during ice and wind storms, and a properly wired generator hookup means heat, lights, and refrigeration stay on when the grid goes down. Whole-home surge protection pairs well with generator work - when power is restored after an outage, the surge that comes with it can damage appliances and electronics. A whole-house surge protector at the panel catches that before it reaches your devices.
Older homes in the Post Falls area often need panel work before a generator or heat tape circuit can be added safely. The load from winter equipment - heat tape, a generator transfer switch, block-heater circuits for vehicles - adds up fast on a panel that was not designed for it. A load calculation before the work starts tells us exactly what the panel can support and what needs to change.
Heat tape keeps pipes from freezing and prevents roof ice dams from forming - two problems that show up every winter in this part of Idaho. The electrical side of heat tape installation means running a dedicated circuit to the location, installing GFCI protection (required for outdoor circuits), and using outdoor-rated wiring throughout. The circuit has to be sized to the tape's load, and the GFCI has to be placed where it can be accessed and tested. This is wiring and circuit work, not plumbing - but getting the electrical supply right is what makes the tape work reliably when temperatures drop.
We know schedules shift, so we keep booking flexible, and that matters for rewiring work, which often comes up during a renovation or after an inspection flags a problem. Homes with aluminum wiring or knob-and-tube wiring need a different approach than a standard repair. Aluminum-wiring remediation involves treating or replacing the connections where aluminum meets devices and fixtures. Knob-and-tube replacement means running new wiring through the structure - it is a larger project, and the scope is confirmed before anything starts.
A full home rewire is triggered by age, damage, or a significant renovation that exposes the existing wiring. We assess what is there, explain what needs to happen, and give a price on the call before scheduling.
EV charger installation means running a dedicated 240-volt circuit from the panel to the garage or exterior location, confirming the panel has the capacity for the added load, and installing the outlet or hardwired connection the charger requires. We handle the circuit and the wiring - the work area left as it was found when we are done.
Garage and block-heater circuits are a related job in this area. A dedicated outlet in the garage for a block heater or battery tender is a straightforward circuit run, and it keeps the vehicle ready on cold mornings.
Commercial electrical work covers a wide range of jobs: panel upgrades for office buildings, outlet and switch installation for retail spaces, commercial lighting installation, wiring for new equipment, and circuit additions when a space changes use. We handle both the repair side and the installation side for commercial customers in Post Falls and Kootenai County.
A commercial call works the same way as a residential one. The scope is confirmed on the phone, the price is set before anything is scheduled, and the work is done to the standards the job requires. Property managers handling multiple buildings can call in a single job or a list - either way, the process starts with the phone.
An electrical inspection covers the panel condition, the age and type of wiring, grounding and bonding, GFCI and AFCI coverage, and any visible hazards in the accessible wiring. For homeowners buying or selling, an inspection gives a clear picture of what the electrical system looks like before the transaction closes. For property managers, it identifies what needs attention in older buildings before a small issue becomes a larger repair.
We treat your home and its wiring the way we would our own when we are on site for an inspection - that means a thorough look at what is there, not a quick walk-through. If the inspection turns up a fault or a short circuit, the diagnosis and the repair path are explained before any work is scheduled.
Electrical pricing depends on what the job involves. A simple outlet repair is a different scope from a full panel replacement or a whole-house rewire, and the price reflects that. We do not quote a number before we know what the work is, and we do not schedule before the price is confirmed.
When you call, you get the rate on the phone for the job as described. If the scope changes once we are on site, that gets explained before anything additional is done. Simple repairs, dedicated circuit runs, panel upgrades, EV charger installations - each one is scoped and priced before the work starts.
Plain answers. Clear options. Safe wiring.
We cover Post Falls and the communities around it in Kootenai County and the broader North Idaho region. That includes Coeur d'Alene, Hayden, Rathdrum, Spirit Lake, Dalton Gardens, Spokane Valley, Liberty Lake, and Cheney. If you are nearby and need electrical work, the service area likely covers you.
Calls are taken every day from 7:30 AM to 11:00 PM. Short-notice work is accepted when the schedule allows - call to ask what is available.
We cover the full range of residential and commercial electrical work, including repairs and troubleshooting, breaker panel upgrades, outlet and switch installation, lighting, ceiling fans, wiring and rewiring, dedicated circuits, EV charger installation, backup generator hookups, whole-home surge protection, and electrical safety inspections.
If you are in Post Falls or the surrounding Kootenai County area, call (986) 946-5326 and we will confirm whether the job fits our scope.
Call (986) 946-5326 and describe what you are seeing or what you need done.
We scope the job on the phone, give you the rate, and confirm what it covers before anything is scheduled. Nothing gets booked until the price is agreed.
It helps to know where the problem is showing up, what the symptom is, and whether it started suddenly or has been building. If the job involves the panel, knowing the amperage of your current service is useful but not required. We can work through the details on the call.
Yes.
When you call (986) 946-5326, you reach someone who knows the trade and can scope the job on the phone.
Decisions about the work get made while you are on the phone, so you are not waiting on a callback to find out what something involves or what it costs.
A warm or discolored outlet, a burning smell near the panel or an outlet, a breaker that trips repeatedly and will not stay reset, or flickering lights that do not track back to a loose bulb are all signs that something needs to be looked at promptly. Partial power loss, where a section of outlets or lights stops working entirely, is another signal worth acting on quickly.
Call (986) 946-5326 and describe what you are seeing.
Check the main breaker panel first for any tripped breakers and reset them if they are in the middle position. If the breaker will not reset or trips again immediately, stop and call us. The cause could be a tripped double-pole breaker, a failed GFCI upstream from a string of outlets, or a wiring fault that needs to be traced before anything else is done.
It starts with the call, where we scope the job and confirm the price. When we arrive, we assess the situation, explain what we found, and get your go-ahead before any work begins. After the work is done, we walk through what was completed and leave the work area as it was found.
The most common factors are hidden or older wiring that requires more time to access or replace, a panel that needs upgrading before a new circuit can be added, or a fault that turns out to be deeper in the circuit than the visible symptom suggested. If anything changes the scope once we are on site, we explain it before doing additional work, not after.
Kitchen circuits carry heavy loads, and repeated tripping usually means the circuit is overloaded, a device on the circuit is drawing too much, or there is a wiring fault. It can also mean the breaker itself is failing. Call us and we will trace the fault before recommending a fix, whether that is a dedicated circuit for a high-draw appliance or a breaker replacement.
Yes. We serve Post Falls and communities throughout Kootenai County, including Coeur d'Alene, Hayden, Rathdrum, Spirit Lake, Dalton Gardens, Liberty Lake, Stateline, and Spokane Valley.
Call (986) 946-5326 and we will confirm coverage for your address.
We take calls and schedule work every day from 7:30 AM to 11:00 PM, including evenings and weekends. If your schedule is tight, let us know when you call and we will work with what is available.
Post Falls Electrical Company handles repairs, panel upgrades, wiring, outlets, lighting, ceiling fans, EV charger installation, generator hookups, safety inspections, and everything in between - for homes, rental properties, and commercial spaces across Post Falls and Kootenai County.
We are available every day from 7:30 AM to 11:00 PM.
Call (986) 946-5326 to get a price on any electrical job.
Not the biggest name in town. Just the one that answers. No runaround.
Below is a plain-language look at the electrical services we handle for homes, rentals, and commercial spaces in Post Falls and across Kootenai County. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If you have questions about a specific job, we scope it on the phone and confirm the rate before anything is scheduled.
| Type of Work | What It Covers | When You Need It | Things to Know |
|---|---|---|---|
| Outlet & Switch Installation |
| Homeowners updating older outlets or adding charging points without adding adapter clutter | GFCI protection is required in kitchens, bathrooms, garages, and outdoor locations. Older homes in Kootenai County often lack it entirely. |
| Electrical Safety Inspections |
| Home buyers, landlords preparing a rental, or owners following a renovation | An inspection gives you a plain answer on repair versus upgrade for anything that needs attention, before a sale closes or a tenant moves in. |
| Wiring & Rewiring |
| Owners of older homes with original wiring, or anyone planning a major renovation | Aluminum branch-circuit wiring is addressed by installing properly rated connections at every termination point. In many cases a full rewire is not required. |
| Electrical Repairs & Troubleshooting |
| Any homeowner or property manager dealing with an unexplained electrical symptom | The fault is traced before anything is replaced, so you know exactly what failed and why before any work is authorized. |
| Lighting Installation |
| Homeowners remodeling, adding outdoor security lighting, or replacing outdated fixtures | Exterior lighting circuits in Post Falls need to be rated for temperature swings. We confirm the wiring and the fixture ratings match the environment before the job closes. |
| Dedicated Appliance Circuits |
| Homeowners adding a major appliance or converting a space to a workshop or home office | A shared circuit that serves multiple heavy appliances is one of the most common causes of nuisance tripping. A dedicated circuit eliminates the competition for capacity. |
| Whole-Home Surge Protection |
| Homeowners in areas that see ice storms, power fluctuations, or frequent lightning | A panel-level surge protector handles large voltage events that a power strip cannot absorb. It covers every circuit in the house from a single installation point. |
| Ceiling Fan Installation |
| Homeowners adding a fan where no existing wiring or box is in the ceiling | A ceiling fan requires a rated box that can support the fan's weight and motion. A standard light fixture box is not adequate and is a common source of failures. |
| Electrical Panel & Service Upgrades |
| Homeowners adding an EV charger, a detached shop, a home addition, or a second major appliance | An older panel is worth a look before a big appliance goes in. A load calculation confirms what the existing service can carry so the upgrade is sized correctly the first time. |
| Heat Tape Installation |
| Post Falls homeowners dealing with frozen pipes, ice dams, or roof edge buildup during freeze cycles | A heat tape circuit without GFCI protection is a fire risk. Many older installations were done without it. We confirm protection is in place before the job closes. |
| Backup Generator Installation |
| Post Falls homeowners on rural-edge properties or anyone who has lost power for more than a day during a winter storm | The transfer switch is what prevents the generator from back-feeding the utility line. It has to be sized to the circuits it will protect and wired to current code. |
| Breaker & Fuse Repair |
| Homeowners with an older panel or a breaker that keeps failing under normal load | A breaker that trips repeatedly under normal load often points to a wiring issue or an overloaded circuit, not just a bad breaker. We check both before recommending a fix. |
Call (986) 946-5326 and we will scope the job on the phone, confirm the rate, and get you on the schedule.
(986) 946-5326